CE Certification 20 Meter Led Strip Lights Manufacturer – High Light 110/220V 5050 SMD LED Strip Light – Hengsen
CE Certification 20 Meter Led Strip Lights Manufacturer – High Light 110/220V 5050 SMD LED Strip Light – Hengsen Detail:
I.Features
1. Adpot SMD5050 LED as lighting sources;
2. 5merters per reel, cuttable by specified length;
3. Good flexibility, can be coated onto fitting surface very well;
4. Low light decline, long lifespan(>30,000hours);
5. Various of waterproof types for different evironments;
6. Complete accessories for easier installation.
II.Parameter
LED type | 5050 | ||
Part No. | HXD5050-30 | HXD5050-60 | HXD5050-96 |
Voltage | 12/24V | ||
LEDs/m | 30 | 60 | 96 |
Watts/m | ≤7.2W/M | ≤14.4W/M | ≤23W/M |
Run Length | 5/10meters/roll | ||
CCT | WW/NW/CW/Red/Green/Blue/Yellow/Golden/Purple/Orange | ||
IP Rating | IP20/IP65/IP68 |
III.Dimension
IV.Accessories
V.Accessories
VI.Operation guidance (Waterproof)
Cut the light strips at the mark” scissors”.or by every 3 leds
Open the siliconglue cap and inject the silicon gel into the endcap without holes
Push the strips into the end cap and let the silicon gel dry for 1 hour
Put the connector wire through the end cap holes
Solder the wire on the PCB
After solder the two wires correctly,push the strips into the end cap with the wires carefully
Inject the silicon gel in the end cap
Make sure the end cap and strip are connected well and let silicon gel dry for 1 hour
VII.Connection Drawing
power supply
Note: Under use, the suggestion for the power would be 20% bigger than LED strip’s Max power to insure the uniformity of the brightness and long time good performance of power supply.
VIII.Note
1.Please apply different IP rate products according to different environmental conditions;
2.Notice no damage to the PCB’s circuit under installation;
3.Adopt suitable power supply to match the led strips. Power is 20% bigger than max.power of led strips to ensure the long time performance of power supply;
4.Forbid to install it when power on. before power on ,please make sure that wiring is correct once installation finished;
5.In order to get the best lighting effect and no damage. Max.continuous length is 15 meters;
6.Please do not stare at the light for a long time when it is working to protect your eyes;
7.Only professional personnel may dismantle and repair.
IX.Application
1.Decorative lighting for hotel, advertising light box, KTV, etc;
2.Backlight for edge lighting/signage lighting;
3.Factories or offices lighting;
4.Holiday decorative lights, display and exhibition lighting;
5.Residential or public facilities;
6.Cove lighting.
Product detail pictures:



Related Product Guide:
High quality Initial,and Buyer Supreme is our guideline to offer the ideal assistance to our shoppers.At present, we are striving our best to become amongst the ideal exporters inside our industry to satisfy shoppers more want for CE Certification 20 Meter Led Strip Lights Manufacturer – High Light 110/220V 5050 SMD LED Strip Light – Hengsen , The product will supply to all over the world, such as: Indonesia, Los Angeles, Norwegian, Aiming to grow to be by far the most experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal merchandise. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to make it possible for you to get complete acknowledge about our things and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.

High Quality, High Efficiency, Creative and Integrity, worth having long-term cooperation! Looking forward to the future cooperation!
